|
|
|
Operating Voltage: |
9VDC +/- 10%.
|
| Read
Power Consumption: |
140 mA typical, 180 mA
maximum. |
| Write
Power Consumption: |
Single Track: 200 mA
typical, 250 mA maximum.
Dual Track: 280 mA typical, 330 mA
maximum.
Triple Track: 360 mA typical, 430 mA maximum.
|
| Memory
Capacity: |
7 bit x 79 characters
maximum.
5 bit x 107 characters maximum.
Optional
support of 7 inch maximum at 75 or 210 BPI. |
|
Encoding/Decoding Density: |
75 or 210 BPI.
|
|
Communication: |
RS-232C, 9600 baud, 8
data bits, 1 stop bit, no parity. |
| |
|
Operating Temperature: |
41° F to 131° F (5° C
to 55° C). |
|
Storage Temperature: |
-22° F to 149° F (-30°
C to 65° C). |
|
Humidity: |
Maximum 90%
non-condensing. |
|
|
| Read
Head Life: |
500,000 passes
minimum.* |
| Write
Head: |
500,000 passes
minimum.* |
|
Magnetic Read Rate: |
Less than one error in
100,000 bits on cards conforming to ISO7811-5 (not induced by
operator error). |
|
Warranty: |
One year, parts and
labor. |
|
|
| Card
Formats: |
ISO/ANSI, AAMVA, and CA
DMV. |
|
Available Configurations: |
Tracks 1 and
2.
Tracks 1, 2, and 3. |
| Swipe
Speed (Reading): |
5 to 50 inches per
second. |
| Swipe
Speed (Writing): |
10 to 35 inches per
second. |
| Media
Thickness: |
.01 to .055 inches.
|
| Slot
Width: |
Maximum card
thickness—.055 (1.37 mm) |
|
Dimensions: |
Length: 7.9 inches (200
mm).
Width: 2.3 inches (59 mm).
Height: 2.2 inches (56
mm). |
| |
| Reset
IDT 3840 |
Resets the unit to
default values. |
| RS-232
port test |
Tests serial port
communications. |
| RAM
test |
Tests the internal
memory. |
| LED
test |
Tests the LED
indicators. |
| Sensor
test |
Tests the card sensor.
|
| Read
card |
Reads a card once and
displays the data. |
| Write
card |
Writes to a card once
and verifies the data. |
|
Continue read card |
Reads card(s) multiple
times and displays the data. |
|
Continue write card |
Writes to card(s)
multiple times and displays the data. |
| Copy
card |
Copies data from one
card to another. |
|
Compare card |
Compares two or more
cards to determine if they are identical. |
| Write
card from file |
Writes cards from a
set-up file. |
| Read
raw data |
Reads raw data and
displays it raw or decoded. |
| Write
raw data |
Writes data to the card
without encoding it. |
| Erase
card |
Erases data on one card
for specified tracks only. |
|
Sequential write |
Writes incrementing
data to a series of cards on a specified track |
| |
| Select
com port |
Selects serial
communication port (Com 1 or Com 2). |
| Check
device model |
Displays the model
number and card type. |
| Select
parity |
Selects parity for each
track (odd, even, or none). |
| Select
card type |
Selects card standards
(ISO, CA DMV, AAMVA, or user-defined). |
| Set
leading zeros |
Change the number of
leading zeros for 210 BPI and 75 BPI. |
| Set
BPI for Track 2 |
Sets bits per inch for
Track 2 (75 or 210). |
| Set
bits per character |
Sets bits per character
for each track. |
| Check
firmware |
Displays the current
firmware version. |
* All
reliability numbers are based on operation in a laboratory
environment. |
